Select serviced mechanical factory supplier meeting 3 standards
Construction of a mechanical processing factory takes a lot of time and money. Therefore, many enterprises have shifted to select serviced mechanical factory suppliers. However, how to evaluate the quality of this factory model? So what standards do enterprises use to evaluate the quality of mechanical factories? The following article will help enterprises identify the standards required for a quality factory.
Immediately select the serviced mechanical factory supplier whose factories meet the following 3 standards:
1/ Standard for noise
In the environmental protection law, there is clear regulation on the standard for noise emitted from manufacturing factories. Clause 2, Article 37 of this Law stipulates: "Production factories or warehouses belonging to the following cases must not be located in residential areas or must have an environmentally safe distance from residential areas:
a) There are flammable, explosive materials
b) There are materials with strong radioactivity or radiation.
c) There are toxic substances for human health, cattle and poultry
d) Dispersing odours adversely affecting human health.
đ) Causing serious pollution of water sources.
e) Causing noise, dispersal of dust, emissions exceed permitted standards. ”
Noise generated from mechanical processing factory will affect the lives of people. Residents can sue to your enterprise to the local authority. After investigating, if the noise exceeds permitted level, enterprises will be fined from 2 to 100 million VND. At the same time, the local authority will force enterprises to take specific measures to improve the noise. If the requirements are not fulfilled, the enterprises will be forced to relocate the factory.
Prestigious factory for lease suppliers often locate the factories in industrial zones. Therefore, this not only minimizes the noise affects to residential areas but also utilizes utilities from industrial zones.
2 / Standard for emission
The State has issued the standards for dust and inorganic substances at QCVN 19: 2009 / BTNMT and organic substances at QCVN 20: 2009 / BTNMT. In these 2 documents, the standards for gaseous wastes in factories are clearly defined. The waste is capable of extremely high-polluting. And there is the risk of health effects if the prescribed level is exceeded.
Before gas waste is discharged from mechanical processing factory into the environment, it needs to ensure that the concentration has been prescribed. The authorities periodically verify and evaluate the quantity of emissions. Enterprises need to pay attention to this standard if they do not want to affect the production and business.
3 / Standard for fire protection and fighting
Decree No. 79/2014 / ND-CP details the implementation of the Law on Fire Prevention and Fighting. Accordingly, the factory business enterprises need to fully meet the safety needs of Fire Prevention and Fighting. Especially enterprises are operating mechanical processing factory. This is a necessary condition and must be maintained during the factory operation period. The enterprises not only meet the conditions but also must be responsible for fire prevention and fire fighting. Satisfying the conditions of fire protection and fighting will help enterprises reduce the risk of fire, overcome the fire incident in the fastest manner to minimize losses.
Above are the top 3 standards to help enterprises evaluate the quality of serviced mechanical factory supplier. These three criteria directly affect the benefits, safety of factories and surrounding residents. If enterprises do not comply properly and adequately, the Government will take necessary sanctions and even stop the operation of the mechanical processing factory.