Notes you need to know when building a 500m2 factory
The development of economy leads to an increase in investment demand of many enterprises. Currently, there are many suppliers providing leases 1000m2 factory or thousands of m2 factory for rent to meet the needs of enterprises. However, there are some enterprises who want to build factories for production. So what should enterprises pay attention when building 500m2 factory or above?
1/ Factory location
At the beginning of construction, contractors must pay attention to the location of the factory. The location of the factory often affects Feng shui and the business of the owner. The factory should ensure the demand that the construction location suits the owner.
In addition, the factory location must also be in line with business orientation and lines. For example, is the factory near a material supply source? Does the factory have convenient transportation to transport goods? Before starting to lay the foundation, enterprises should carefully consider choosing an appropriate position.
2/ Foundation preparation for 500m2 factory
After selecting the factory location, the investor will proceed to lay the foundation. When building a 500m2 factory or any multi-scale factory, enterprises need to pay attention to the factory foundation and base. As this is the support and bearing of the whole factory. If the foundation and base are solid the factory operation will be good and efficient.
The preparation process of factory foundation and base will affect the quality of the works and the construction cost. For factory-built on hard ground, driven pile and timber pile will be used for the foundation. Conversely, if it is located on soft land, foundation reinforcement must be required. Thus, depending on which ground the factory is built, there will be an adjustment accordingly.
3/ Paying attention to the factory paint layer
The paint color of the factory is a factor to help the factory become more airy and spacious. Contractors often use epoxy coatings for factories. Epoxy paint is widely used for many surfaces such as floors, walls, stair, etc,
Painting not only helps the factory increase the aesthetics, but also helps to make the factory surface divided clearly. At the same time, epoxy coating will help the factory increase dust resistance. Cleaning the floor surface becomes quicker and easier.
4/ Designing appropriate steel columns
Enterprises need to design steel columns to suit the space and area of 500m2 factory. When designing the steel columns, enterprises must have clever arrangement to avoid redundancy or shortage at both ends. Normally, there are about 20kg to 32 kg of steel for every meter of steel. Depending on the level of investment, there is appropriate allocation.
Hopefully, the 4 notes above will help enterprises have more information to build factories. However, building a factory is not an overnight event. Therefore, enterprises can choose factories for rent from a reputable supplier. The factory model is not only quality but also helps enterprises start production quickly. We wish you would find a satisfying factory for production activities!